Teknik Grafik Komputer Dengan Menggunakan Program Matlab Untuk Menentukan Kuantitas Pergeseran Kaki Mesin Dalam Proses Alignment
Abstract: Recently, rotational
engines widely used in industries. Engine’s speed come higher and higher so
that the demand on its reliability increase as well. High reliability will be
obtained if the cause of failure is known and overcome. One machine element
which generally has shorter life time is bearing. Damage on bearings is
accelerated by the increase of load due to misalignment. Related with the
prevention of bearing’s damage, study on shaft misalignment has been carried
out. The aim of the study was to find techniques to obtain an acceptable
alignment procedure. In practice the machine’s foot shifting determined
manually using graphs and side view of the quantity of misalignment. This study
is carried out using graphic technique in determining the shifting quantity of
machine’s foot using Matlab. By this technique and computer program it can be
determined the quantity of misalignment on a machine and what should be done to
shift the machine. Using this technique and computer program the calculation
process can be done more quickly and accurately. Machine’s foot shifting in
alignment process in order to get an accurate misalignment measurement data use
a dial indicator with a variety of methods such as face and rim, face to face,
reverse indicator, double radial, and the shaft to coupling spool.
Penulis: Sir Anderson,
Nasrullah Nasrullah, Rivanol Chadry
Kode Jurnal: jptmesindd110144
